How can I connect Headphones to a telephone handset? - connect headphones to telephone
I wish PC standard stereo (or mono connection), a headset for Avaya 4610SW IP Telephone. The headset has two adjustment points for connection to PC while the phone has to make a point to phone. I am open to a certain pressure / join if someone can give me some detailed schematics.
Sunday, January 17, 2010
Connect Headphones To Telephone How Can I Connect Headphones To A Telephone Handset?
4 comments:
They want a practical way. (make a chart using data from their distribution)
1. You see, pull up your base station and handset.
2. Hardset unscrew the screws on the inside and open it with screwdriver delecatly at least, if you attach the specimen from both sides of the cover other EACK.
3. Check the color code of the headset and voice as they have four son of the copper-colored plastic with screw heads enameld.
4. Check Point jack color code pin, and placed before the establishment of the base (without Assu inserteted and lines of communication as two sides as the headset (4 Ohms SPK) and the nozzle / 2-pin microphone) connects. and discover the base of the phone and sell them the foundation of Phase 3 (1 Mic) 2 Stereo Jack or separately with the electricity and telephone lines in the series, while the rear platform assembeled. 1 goal in mono color-coded micro-weld connecting pins Micro welding helmet and headset to the phone motherboard (both head phone lineE is a speaker who has a series of mono are connected instead of stereo.
Now you have two options;
1:) or is one / two pin-sized hole in a static thrust or pull miniature electric drill drilling useful in the body in the suits, which cover while back, the separation of the base game of telephone conversations, but test coverage before Weith room after packing to the base station.
correctly inserted inside the cover and bottlenecks around the mouth of the cat installation, apart from the hole it into the lock body covered contract must be recorded until the agency since it was installed from the time of production. do the same with Jack seconds.
Pack the front cover to determine that all welds are properly soldered right on the motherboard needed.
1a) that the same procedure coading on the side of the cable connection can check for the initial opening of color (which, if they (the bus or SPK) What collaror line-soldiers) can be sold lines (cable) to set the phone back in his head as the application does the drilling into the body of the earpiece of the phone. Some games are small, have so little space inside to install the phone and the back cover and screws, if the base station has a room for the proper functioning of decent future.
or do something, a good team into the body of reporting on the station with a small telephone Netherlands super glue stick.
I do not think that the helmet-shaped or game devices usually do not control equipment stereo mono speaker
Buy a new phone. If you disassemble electronics, and does not know the final result will be a new purchase anyway, but you learn a few things, to buy a new game, and then meet with the others for you to call and take a break
$ 10, you can jump on Radio Shack
Post a Comment